 |
| RH Front Splash Shield |
Installing the splash shields was not an enjoyable mustang experience. The originals were long gone so I did not have a template to compare against. This pair came from MP Products - not sure what other vendors reproduce them. Anyway, be prepared break out the heat gun and scissors - because I had to bend the crap out of both sides and trim a good 3/4 inch off of the LH side. The holes for the wiring clips were way too big - so I glued in a couple of washers to keep the clips in place. Should keep the headlight connectors from getting 'splashed'.
Parts: Reproduction front splash shields from MP Products, bolts from AMK
No comments:
Post a Comment